Hydraulic Mill Roll Stand Corrugated Machine

The tension is controlled by pneumatic disk brake and multi-pointes pneumatic brake.Inner expandable clamp to improve efficency

 Corrugated cardboard production line

1. 3 ,5,7 layer production line

2. width:1400mm-2500mm3. speed:80m/min.-250m/min

4.save labor

5.High efficiency

a)Mill Roll Stand

b)Single Facer

c)Pre-heater

d)Pre-conditioner

e)Double Preheat/Triplex Preheater

f)Double bridge

g)Glue machine

h)Slitter scorer

i)Cut-off

j)Sheet delivery  

k)down stacker

Rolls of kraft paper in Mill Roll Stands (of both medium&Liners) are fed into the corrugator and run through preheating ,corrugating(of A-C-B-E flute of single facer),gluing,steam-heating,press-cooling

cross cutting,slitter-scorer trimming the cardboard into large sheets clled box blanks and finally slide into automatic stacker the loads them into a large,rolling platform.From here,box blanks ,the finished products,will be transported to the other machines that will convert them into finished container/boxes.

 

 

Specifications for Low speed Corrugated Paperboard Production Line

Specification	Maximum width of paper	Maximum machine soeed	Economic production speed
100-1600-1	1600mm	100m/min.	60-80m/min.
100-1800-1	1800mm	100m/min.	60-80m/min.

Middle-speed corrugated cardboard production line

Specification	Maximum width of paper	Maximum machine soeed	Economic production speed
150-1600-1	1600mm	150m/min.	80-120m/min.
150-1800-1	1800mm	150m/min.	80-120m/min.
150-2000-1	2000mm	150m/min.	80-120m/min.
150-2200-1	2200mm	150m/min.	80-120m/min.

High-speed Corrugated Cardboard Production Line

Specification	Maximum width of paper	Maximum machine soeed	Economic production speed
220-1600-2 (7 layer)	1600mm	220m/min.	150-180m/min.
220-1800-2 (7 layer)	1800mm	220m/min.	150-180m/min.
220-2000-2 (7layer)	2000mm	220m/min.	150-180m/min.
220-2200-2 (7 layer)	2200mm	220m/min.	150-180m/min.

Hydraulic Mill Roll Stand Corrugated Machine